|
|
|
1
|
A partition wall is installed between the cab and the medical cabin, separating the front and rear compartments, and two sliding windows on the partition wall
|
1
|
2
|
The left side of the medical cabin is installed with a cabinet that can hold 2 10L oxygen cylinders
|
1
|
3
|
The medical cabin is installed with a seat belt clamshell
|
1
|
4
|
A three-seat bench with safety belt and a shovel stretcher fixing cabinet are installed on the right side of the medical cabin
|
1
|
5
|
A medical cabinet with a hub is installed on the left side of the medical cabin, and a long infusion pump fixing rod is arranged above
|
1
|
6
|
Oxygen socket for ventilator is installed on the left side of the medical cabin
|
1
|
7
|
An oxygen socket for the humidifier is installed on the left side of the medical cabin
|
1
|
8
|
Install an 8-door transparent sliding locker on the top left side of the medical cabin
|
1
|
9
|
Front left corner medical cabinet for medical cabin
|
1
|
10
|
Install the first aid kit fixture (hook) on the partition wall
|
1
|
11
|
The medical cabin is equipped with a complete closed oxygen supply system
|
1
|
12
|
The medical cabin is equipped with 10L oxygen cylinder (with pressure reducing valve)
|
2
|
13
|
Humidifier for medical cabin
|
1
|
14
|
A set of foldable infusion suspension device on the top of the medical cabin
|
1
|
15
|
1kg. Fire extinguisher and support frame
|
1
|
16
|
Intercom system before and after medical cabin
|
1
|
17
|
One-time molding environmentally friendly polymer laminating material for walls, doors and roofs on both sides of the medical cabin
|
1
|
18
|
The floor in the car is made of acid and alkali resistant, fireproof, non-slip, anti-static
|
1
|
19
|
The raised edges around the medical cabin prevent dust accumulation and anti-skid
|
1
|
20
|
Red strong reflective tape on the waist and top of the body
|
1
|
21
|
High-end automatic boarding stretcher (with vehicle-specific platform)
|
1
|
22
|
A negative pressure purification device is installed on the left side of the middle partition wall of the medical cabin.
1.Install a speed-adjustable negative pressure exhaust bacterial filter device on the left side of the medical cabin. The function of the negative pressure system should enable the medical cabin to form an atmospheric low pressure relative to the external environment. The air inlet and the negative pressure port are arranged diagonally , And through the exhaust device and the
connected high-efficiency filter sterilizer, to prevent the contaminated air in the medical cabin from leaking, to achieve ventilation and non-polluting environment.
2. relative pressure: when the negative pressure device is activated, the relative pressure in the cabin should be The national ambulance industry standard ranges from -10Pa to -30Pa, with a national test agency calibration certificate, providing a copy of the certificate; filter efficiency: the air filter's filtration rate of particulate aerosol with a particle size of 0.3μm should be greater than 99.7%.
|
1
|
Central power distribution system
|
1
|
Intelligent automatic charging system (vehicle 12V / 220V inverter power supply system)
|
1
|
2
|
10m long mobile cable
|
1
|
3
|
Cab 12v socket
|
1
|
4
|
Install 220v socket in medical cabin
|
2
|
5
|
Install 12V socket in medical cabin
|
2
|
6
|
220V / 16A waterproof, external power socket with protective cover
|
1
|
7
|
12V DC power supply system installed in the medical cabin
|
1
|
Air conditioning and lighting system
|
1
|
Cab air conditioning
|
1
|
2
|
Medical cabin modified straight row air conditioner
|
1
|
3
|
Medical cabin heating
|
1
|
4
|
Install a two-way air intake and exhaust system on the top of the medical cabin
|
1
|
5
|
Install lighting square lights on the top of the medical cabin
|
4
|
6
|
Infusion lamp installed on top of medical cabin
|
2
|
7
|
UV disinfection lamp
|
1
|
8
|
Install illuminating lights for ambulance field at the rear of the roof
|
1
|
|
1
|
Installation of alarm and warning lights control button in the cab
|
1
|
2
|
The vehicle is installed with dual electric horns, siren, microphone, and alarm sounds for slow dual tone conversion
|
1
|
3
|
Loudspeaker outside the car is built into the siren
|
1
|
4
|
Install a long flashing warning light (blue) at the front of the roof
|
1
|
5
|
Two led strobe lights are installed at the rear of the roof
|
2
|
6
|
Install LED strobe lights and lights on the left and right sides of the rear of the vehicle
|
4
|