ISUZU 600P fecal suction truck

ISUZU 600P 5CBM fecal suction truck adopts ISUZU 600P original chassis, ISUZU 120 HP 4KH1-TCG40 Euro 4 engine, ISUZU MSB 5 speed transmission, cold-warm air-conditioner, 2.5ton front bridge/4.8ton rear bridge, audio with USB interface, air-cut brake with vacuum booster pump, the driver cab cannot turntable, car trim, 650-16 tyre,etc.

The volume of the ISUZU 600P fecal suction truck is 5cbm, adopts adopting Wugang GB 5mm steel sheets, equipped with the leading chengliwei vacuum pump, with feces view window, one discharging open, cleaning device, mobile hanger rod, with 5m length hose, oil separator, anti-overflow valve, metal coating tanker, etc.

ISUZU 600P 5cbm fecal suction truck
Total mass(kg)	7300	Curb mass(kg)	3460
Rated mass(kg)	3710	Chassis model	QL1070A1HAY
Driver cab person	2	Max speed(km/h)	105
Approach/departure angle(°)	24/16	Front/rear suspension	1015/1605
Overall dimension(mm)	5980X1880X2350	Cargo body dimension(mm)	XX
Axles	2	Axle load(kg)	2580/4720
Tyre	7.00-16 14PR,7.00R16 14PR	Tyre nos.	6
Front tread(mm)	1504	Rear tread(mm)	1425
Wheelbase(mm)	3360	Springs	8/6+5
Emission standard	GB17691-2005( Euro Ⅳ),GB3847-2005	Fuel type	Diesel
Engine model	Manufacturer	Displacement	Power
4KH1-TCG40	ISUZU	2999	88

1. Our fecal suction truck is sanitary equipment, and mainly composed of power takeoff, transmission shaft, vacuum pump, manure tank, pipe network, vacuum pressure gauge, visible window for sewage, and hand-washing facility.

2. the chassis is manufactured by China Dongfeng Automobile Company, China Dongfeng Motor Limited Company, China Dongfeng Automobile Limited Liablity Company. It also can be purchased from other demostic well-known companies, such as FAW, SINOTRUK, FOTON, ISUZU, Hualing, North benz, etc.

The fecal suction truck is widely used to transport liquid manure, slurries, crude oils, and other liquid with small suspending impurity and mainly used in such conditions, including septic tanks, gutters, sewers, toilets, and more.

Feces-filling operation

1.       place the truck at the operating spot as close as possible.
2.       put soil pipes into septic tanks as deep as possible, and make sure the pipe is below 300mm under liquid lever.
3.       make the handle bar of four-way valve is perpendicular to the ground.
4.       place derailleur into the middle position, start the engine, push down on the clutch pedal, and then pull back the switch of power take off. After that, the vacuum pump begins to operate.
5.       start the alarm annunciator. When the whole process is finished, the alarm annunciator will automatically alarm audibly and visually.
6.       the operator should keep a close watch on the whole process. When liquid level reached the middle position of observation mirror, he or she should notice the driver immediately. Then the driver will pull power takeoff into idle position and cut off power. After that, the vacuum pump stops working.
7.       wash soil pipes, and then place then into the case.
8.       drive the truck away from the operating spot.