dongfeng brand 5,000Liters stainless steel milk tanker truck

The milk transporter is also called fresh milk transporter, milk tanker, liquid food transporter. The tank body is made of food grade stainless steel plate. The outer part of the tank body needs to be used as insulation layer to prevent the deterioration of fresh milk. The inside of the tank body needs smooth and no acute angle. A CIP (cleaning device) is added to each milk tank.

The material of the tank is made of high-quality aluminum alloy and stainless steel. The tank and the tank are finely polished. The tank can be equipped with heat preservation and refrigeration functions. It can transport a variety of chemical raw materials, dairy products, oil products and liquid food transportation.

The tank can be set to multiple positions according to the demand, and a variety of media can be dispensed at any time, so that the pump can be pumped in and out, and the table can be over-extended, but the table and the self-flowing table can be used.

Fresh milk transport vehicle modification configuration: the tank structure is divided into three layers: insulation layer, insulation layer and tank body.
One. The body of the frame can be made of food grade 304 material stainless steel plate, and the tank body can be made into 2-3 cabins. The tank body requires smooth and no acute angle. A cip (cleaning device) tank is provided in each milk tank with a washer.
Second, the middle of the tank is an insulation layer, which has a heat preservation effect to prevent deterioration of fresh milk. The temperature change does not exceed 1 degree for 24 hours at a temperature difference of 30 degrees. The insulation material is insulated with 80 (mm) thick polyurethane foam material.
Third, the outer layer of the tank (protective layer of the insulation layer) is made of 2mm thick 304L stainless steel. The outer skin and trunk of stainless steel are beautiful in appearance, the whole body is beautiful in appearance, scientific in structure, light in weight and good in strength.
4. Each single warehouse has a separate discharge port (self-flow port) and a feed port (can port).
5. Optional chiller, rock wool insulation, exhaust gas circulation heating, and stainless steel pump to make the vehicle have a suction function.

ITEM	UNIT	DESCRIPTION
Vehicle		DONG FENG milk tank truck
Overall dimensions	mm	5995x2000x2400
Milk tanker	L	5000
GVW	kg	Appro×7300
Curb weight		Appro×2950
Loading weight		Appro×4220
Wheel base	mm	3300
Front/Rear overhang	mm	1032/1663
Approach/departure angle	°	19/15
Max speed	Km/h	90
Standard configuration	1) The milk tank structure is divided into three layers, the outer layer, the insulation layer and the inner layer of the tank. 2) Outer layer material is stainless steel plate, 2mm thickness. 3) Insulation layer, with insulation function, to prevent deterioration of milk. Insulation material is 80mm thickness polyurethane foam. 4) Inner layer is using food grade stainless steel plate, there is a cleaning device inside the milk tank. 5) In the 30 degree temperature difference conditions, 24 hours temperature change does not exceed 1 degree.
Chassis Parameter
Cabin	Single row cabin, ,power steering,air conditioner, 2 passangers.
Drive type	4×2
No.of axle	2
Engine	Brand : DONFGENG CHAOCHAI Model : CY4102-C3F, 95hp Fuel type : diese. Displacement : 3856ml Emission standard : Euro III
Gearbox	5-speed, manual
Tire model	7.00-16
No.of tire	6+1

Milk tanker truck characteristic :

(1). The milk tank is made up of three layers:outside layer(for physical protection),middle layer(thermal insulation),inner layer tank(for milk filling).

(2). The thickness of thermal insulation layer is 80mm.

(3). The tanker liner is made of high quality food grade stainless steel,and the inner tank has been fine polished.

(4). Equipped with PIC cleaning devices.With function of thermal insulation: medium temperature change≤1°C during 24 hours.

(5). The tank can be divided into several parts according to demand to load different medium.